Crab boat for sale dutch harbor

Boats in Alaska

There are currently 29 boats for sale in Alaska listed on Boat Trader. This includes 2 new watercraft and 27 used boats, available from both private sellers and well-qualified boat dealerships who can often offer boat financing and extended boat warranties.

The most popular kinds of boats for sale in Alaska presently are Sport Fishing, Pilothouse, Motor Yachts, Express Cruiser and other boats, while the most common boat brands available are Bayliner, Blue Water Boats, Maxweld, ACB and Aluminum Chambered Boats. Powerboats are more common than sailing vessels in Alaska with 26 powerboats listed for sale, versus 5 listings for sailboats.

The most common engine type on powerboats in Alaska is inboard, outboard, inboard/outboard and other while the majority of powerboats listed have diesel and gas fuel systems.

Boat prices in Alaska

The price for boats in Alaska range from $8,750 up to $37,995,000, with an average boat value of $90,000. When researching what boat to buy, keep in mind the vessel's condition, age and location, and be sure to research the top cities in your area (including Ketchikan, Anchorage, Homer, Juneau and Sitka) as well as the top states in the country, such as Florida, Texas, Michigan, California and North Carolina.

Pinterest

Today

Watch

Explore

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.

Explore

Crab boat for sale dutch harbor

Save

From

rlv.zcache.com

Norden

Dede Taylor

496 followers

More information

Crab boat Dutch Harbour...just another one of his adventures!

Find this Pin and more on Ships by Dede Taylor.

Norden

Deadliest Catch

Fishing Vessel

Oil Well

Yellow Sun

Northwestern

Fishing Boats

Hull

Frontier

More information

Crab boat Dutch Harbour...just another one of his adventures!

Find this Pin and more on Ships by Dede Taylor.

More like this

CR22-025

$1,500,000

Year:1974Length:125Hull:SteelBuilder:MarcoLocation:Washington

125’x28’ steel vessel built in 1974 by Marco. Well-suited as a crabber, pot-cod, and tender vessel. Caterpillar 398B main engine rated at 850 hp, Caterpillar 7251 gear with 3.95:1 ratio. 50k gallons fuel capacity. (2) 180 kW Caterpillar 3306B gen sets. Isuzu A6BG1T...

More Details

CR22-023

$485,000

Year:1996Length:47Hull:FiberglassBuilder:Hansen/Jim MosserLocation:Oregon

47.8’x14.5’x6.5’ fiberglass Hansen crabber/troller, completed in 1996. Cummins NH220 main rated at 272 hp. Twin Disc 512 gear w/ 3:1 ratio. Isuzu 4HJB1 w/ 20kw Mac Lima genset. Fuel capacity of 2,750 gallons in (5) tanks. Fish hold packs 50,000 lbs. Spray brine sys...

More Details

CO22-006

$950,000

Year:1974Length:58Hull:SteelBuilder:MarcoLocation:Alaska

58’x18.3’x9.3’ steel combination vessel rigged for pots, longline and tendering. Built by Marco in 1974. Cummins KT-19-M rated at 425 hp w/ Twin Disc 514 reduction gear. John Deere 4045 w/ 55kW and Sahabu w/ 22kW gensets. Packs 98k lbs in (2) insulated fish holds....

More Details

CO22-005

$1,950,000

Year:1997Length:58Hull:SteelBuilder:Vern EgglestonLocation:Oregon

58’x24’x8’ sponsoned steel combination vessel, rigged for crab, albacore, and squid, built in 1997 by Vern Eggleston. New Cummins 855 main rated at 425 hp,w/ low hours. ZF 350 gear. John Deere 30kw genset and Isuzu 40kw genset w/ PTO hydros. Fuel capacity of 5,400 ga...

More Details

TR22-015

$185,000

Year:1967Length:39Hull:WoodLocation:California

39’3”x12’x4’ wood troller/crabber with permits, built in North Bend, OR in 1967. John Deere main rated at 175 hp w/ approx 3,300 hours. Twin Disc 5050SC gear. 440 gallon fuel capacity in (2) tanks. Briggs & Stratton gas generator. Fish hold packs 5,000 lbs. Includ...

More Details

CR22-024

$350,000

Year:1998Length:38Hull:AluminumBuilder:Ed WingLocation:Oregon

38’x15’x3’ aluminum crabber/troller built by Ed Wing in 1998. Cummins 8.3 main rated at 330 hp w/ 2,000 hours. Twin Disc 507 gear. 600 gallon fuel capacity in (2) tanks. Fish hold packs 10,000 lbs crab. Deck equipment includes crab block, davit, dump box, longline...

More Details

DV22-003

$95,000

Year:1975Length:32Hull:FiberglassBuilder:RadonLocation:California

32’x10’x3’ fiberglass Radon built in 1975. Rigged as urchin dive boat. Cummins 6CTA 8.3 main rated at 450 hp w/ 8,600 hours. ZF V Drive 302 gear. Cruises at 18 kts, and 22 kts WOT. Fuel capacity of 250 gallons in (2) tanks. Fish hold packs 1,000 lbs. Includes net...

More Details

CR22-022

$495,000

Year:2021Length:35Hull:AluminumBuilder:North Cross Aluminum, CustomLocation:Alaska

35’x12’x3.5’ custom aluminum crabber, built in 2021. Cummins QSB 6.7 main rated at 480 hp w/ approx. 1,000 hours. ZF286A gear w/ 2.208:1 ratio. 400 gallon fuel capacity. 8” bow thruster. Does 24kts at 3000 rpm. Deck equipment includes 12” Hydroslave block, davit,...

More Details

CR22-021

$150,000

Year:1993Length:30Hull:FiberglassBuilder:Main MarineLocation:Oregon

30’x10’x2’ fiberglass crabber built by Main Marine in 1992. Twin Volvo D4 engines each rated at 260 hp w/ DPH Duo-prop outdrives. 24 kts cruise, 20 kts w/ 50 pots onboard. Packs 1,500 lbs crab in tanked fiberglass hold w/ hydraulic Pacer circulation pump. Custom hy...

More Details

CR22-020

$2,500,000

Year:1978Length:150Hull:SteelBuilder:Halter Marine Services, Inc.Location:Alaska

150’x38’x16’ steel crabber/tender, built in 1978 by Halter Marine Services. Twin GMC 16V149 mains rated at 970 hp each. Twin Disc MG-504 gear with 5.17:1 ratio. 260 kW and 300 kW 12V71 and 200 kW 8V71 Detroit gensets. Packs up to 700,000# salmon in 4 holds, extensiv...

More Details

CR22-019

$390,000

Year:1942Length:44Hull:WoodBuilder:Jacobson ShipyardLocation:California

44’x12’x6’ wood troller with crab and salmon permits, built in 1942 by Jacobson Shipyard in Tacoma, WA. Detroit 671 main w/ 7,408 hours and “crash box” reduction gear. 9kw Northern Lights genset. 14-ton fish hold w/ 6,000 lb crab tank insert. (2) Kolstrand 3-spool g...

More Details

CR22-018

$44,500

Year:1982Length:39.5Hull:Wood/FgBuilder:AI Boat MFG IncLocation:California

39.5’x14’x4’ fiberglass over wood utility vessel, built by A1 Boat MFG Inc in 1982. Detroit 871 main rated at 400 hp. Twin Disc gear w/ 2:1 ratio. Fuel tank holds 300 gallons. Single fish hold of unknown capacity. (2) hydraulic winches on deck, mounted port and stb...

More Details

CR22-017

$429,000

Year:1980Length:57Hull:SteelBuilder:Monk/Roger SmithLocation:Oregon

57’x18’x9’ steel Monk designed crabber and 500-scoop bait, boat built by Roger Smith in 1980. Cummins 505 main rated at 280 hp, rebuilt in 2020, w/ Twin Disc gear. (2) Northern Lights 30kw gensets, new in 2020. 4,200 gallon fuel capacity in (6) tanks. Packs 62,000 l...

More Details

CO22-004

$1,200,000

Year:1973Length:74Hull:SteelBuilder:Allied ShipyardLocation:California

74’3”x22’x9.6’ steel combination vessel rigged for crab and shrimp, built by Allied Shipyard in 1973. CAT C18 rated at 465 hp w/ ZF gear. Bollard-Kubota 28kw genset w/ electric PTO. 11,000 gallons fuel in (6) tanks. Packs 32k lbs live crab in front hold w/ (500) po...

More Details

TR22-009

$60,000

Year:1912Length:45Hull:WoodLocation:California

45’x11.3’x4.3’ wood double-ender built in 1912, rigged for crab and salmon. 180hp Detroit 671 main w/ Twin Disc gear. 500 gallon fuel capacity in (2) tanks. (2) fish holds, one aluminum insert w/ lift. Deck equipment includes 16” Junes crab block, davit, bait choppe...

More Details

CR22-015

$37,000

Year:1983Length:22Hull:FiberglassLocation:California

23’x8.4’ custom fiberglass center-console lobster boat built in 1983, recently renovated with new deck, fuel tank, canopy, and aluminum center console. 350 hp Marine Power main w/ only 5 hours, and Volvo duoprop outdrive. Fuel capacity of 40 gallons. Rigged with Hydr...

More Details

CR22-016

$65,000

Year:2002Length:23Hull:AluminumLocation:California

22’x9.6’ custom aluminum lobster boat built in 2002. 383 hp Power Stroke main w/ Bravo II outdrive, and only 1,600 hours. Does 20 kts. Fuel capacity of 150 gallons. Rigged with Hydroslave 12” hauler. Includes galvanized double axle trailer. Electronics include Gar...

More Details

TR21-010

$350,000

Year:1966Length:50Hull:SteelBuilder:James MurphyLocation:California

50’x14’x8’ steel troller/crabber built in 1966 by James Murphy. Detroit 671 main engine. Capitol gear with 3:1 ratio. 2500 gallons fuel capacity. Makes 7 knots. Nissan 27 kW and Hydropower 5 kW gensets. Packs 24,000# salmon, crab insert holds 7k#. Copeland...

More Details

CR22-014

$750,000

Year:1969/2018Length:58Hull:SteelLocation:Oregon

58’x24’ steel crabber built in 1969 and extensively refit and sponsoned in 2018 by North Coast Marine. Detroit 8V71, rebuilt in 2022, rated at 385 hp w/ Twin Disc 509 w/ 4:1 gear ratio. John Deere 4045 w/ 45 kW genset. 30 ton RSW system w/ titanium chill. (2) insula...

More Details

CR22-013

$245,000

Year:1978Length:48Hull:SteelBuilder:Troyer St. ClairLocation:Alaska

48’x14’x7.7’ steel crabber, Troyer design, built by St. Clair in 1978. Isuzu UM6Hk1 rated at 350 hp w/ Twin Disc 509 gear. Isuzu 20kW genset. (2) insulated fish holds pack approx. 40k lbs salmon. Recent work includes blasted/painted hull, lazerette, boom and new wat...

More Details

CO22-003

$680,000

Year:1975Length:55Hull:SteelBuilder:Ross & BohnLocation:Oregon

55’x15.5’x6.5’ steel combination vessel rigged for crab, salmon, tuna, and built by Ross and Bohn in 1975. Cummins QSL9 main rated at 285 hp, w/ Twin Disc 509 gear. 32kw Onan genset. 3,200 gallon fuel capacity in (6) tanks. Packs 14k lbs crab, or 18 tons albacore in...

More Details

SE22-004

$55,000

Year:1973Length:64Hull:WoodBuilder:FrostadLocation:Washington

64’x18’ wood seiner/crabber/tender built by Frostad in 1973. House recently damaged in fire.  Vessel is in the water, main, aux and RSW operate.  Caterpillar D343 main engine rated at 365 hp. Twin Disc MG514 gear with 4.5:1 ratio. 50 kW John Deere...

More Details

CR22-012

$180,000

Year:1973Length:36Hull:FiberglassBuilder:Modutech Location:California

36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...

More Details

CR22-011

$725,000

Year:1979Length:55Hull: SteelBuilder:Giddings/WarrenLocation:Oregon

55’x16.6’x6.2’ steel combination vessel package, built by Giddings in 1976. 550 hp Cummins NTA-855M main w/ Twin Disc 514 gear. 30kW Isuzu genset, new in 2015. (3) hydraulic pumps. Packs 50,000# in insulated fish hold. Spray brine RSW system w/ 12-ton Carrier compr...

More Details

CR22-010

$900,000

Year:1980Length:67Hull: SteelBuilder:Metal Craft MarineLocation:Oregon

67’x22’x10’ steel combination vessel rigged for crab and shrimp, built by Metalcraft Marine Corp in 1980. CAT 3408T main, rebuilt in 2019, w/ Twin Disc 514 gear. New free standing mast, boom and fish hold added in 2022. 83 kW John Deere and 20 kW Cummins gensets. Fish...

More Details

CR22-009

$1,320,000

Year:1978Length:61 Hull:SteelLocation:Oregon

61’x18.4’x10.7’ steel combination vessel built in 1978, rigged for crab and shrimp. Cummins KT19 main rated at 365 hp, w/ Twin Disc 514 gear. Isuzu 20kw and Northern Lights 30kw gensets. Packs 40,000 lbs crab in front hold, aft hold packs 20,000 lbs iced shrimp. Com...

More Details

SP22-002

$195,000

Year:1980Length:35Hull: FiberglassBuilder:Delta/LeClercqLocation:Alaska

35’x14’ fiberglass gilllnetter built in 1980 by Delta/Leclercq, lengthened in 2007. Caterpillar 3208 main engine rated at 210 hp. Twin Disc 506 gear with 2:1 ratio. 5 kW Kubota gen set. Packs 10k# in (3) fish holds. 7.5 ton IMS RSW system new in 2019. Deck equipme...

More Details

BP22-001

$225,000

Year:1988Length:33Hull: AluminumBuilder:J&H BoatworksLocation:Alaska

33.5’x12’ aluminum bowpicker/longliner built in 1988 by J&H Boatworks. Twin Volvo D6330A main engines rated at 330 hp each. Cruises at 25 knots. 200 gallons fuel capacity in (2) tanks. Packs 18k#. Full galley and marine head. Deck equipment includes drum and power...

More Details

CR22-008

$70,000

Year:1969Length:33Hull: FiberglassBuilder:RobertsLocation:Washington

33’x11.5’ fiberglass crabber/gillnetter built by Roberts in 1969. Yanmar 6-LY main engine rated at 300 hp. New ZF gear and bowthruster. Makes 10 knots. 200 gallons fuel capacity. Packs 6k# in brailers. Deck equipment includes Kinematics gillnet drum, hydraulic dav...

More Details

CR22-007

$230,000

Year:1982Length:29Hull:FiberglassBuilder:CloudburstLocation:California

29.6’x11.5’x5’ fiberglass/wood Cloudburst built in 1982, rigged for crab and salmon, INCLUDING 500 pot CA crab permit good to 34’7”, and CA salmon permit. 260 hp Cummins 6BTA 5.9 main w/ Twin Disc 506A gear. Fuel capacity of 160 gallons in (2) tanks. Packs 3,500 lbs...

More Details

Sign up for email updates

How do you catch king crab?

Fishermen use a box-shaped trap called a pot, which consists of a steel frame covered with a nylon mesh. Each pot weighs 600–800 lb (270–360 kg) and a ship may carry 150 to 300 pots. Fish, usually herring or codfish, are placed inside as bait, and then the pot is sunk to the sea floor where the king crabs reside.

Why is the Time Bandit for sale?

It was built in 1991 and since then it was contained by Hillstrand brothers. Apparently, the captain brothers decided to put the ship on sale as Neal and his wife were getting a divorce in October 2018, and this entitled his wife for a share of the boat if it was sold.

Why does Alaska have aluminum boats?

Aluminum boats are rugged and easier to power than fiberglass. They will take the abuse of everyday fishing and can handle the wear and tear of trailering. Aluminum is less likely to catastrophically fail if the boat collides with a large log or submerged structure.