Details
EXEDY Stage 2 Sports clutch kits are designed to handle the abuse of high power modified engines whist retaining adequate driveability. The cerametallic friction material can handle much more abuse than stock type disc assemblies without slipping or fading. All EXEDY Stage 2 cerametallic clutch discs have sprung center dampers to reduce the impact and shock loads transmitted through the drivetrain.
Main Benefits
A reduction of 10% inertia over the original equipment part.
Up to a 40% increase in torque capacity over standard.
Approximately 40% higher clamp load than the standard clutch.
Suitable For
Road
Track Day
Circuit Racing
Time Attack
Drifting
Drag Racing
Rally
Clutch Cover
Single Series clutch covers are designed to achieve a clamping load that is approximately 40% higher than the genuine part enabling a higher torque capacity.
Ductile material is used for all pressure plates and high burst strength can be achieved in all temperature ranges. Note: Single Series Clutch Kits with HD in the middle of a kit reference denote that the cover has a higher clamp load. e.g. Mitsubishi EVO Organic kit: MK04HD601
Clutch Disc
Manufactured using a unique metallic configuration and low density metallic material, T5001 Carbonrich, S-Type cerametallic discs are designed to be light weight; inertia is 10% lower than
the genuine part. Stage 2 Sports discs have excellent heat dissipation characteristics.
Note: There are two variations of S-Type kits for some models. For example, the kit FK01T601 has a 3 paddle disc whereas the kit FK01T1601 has a 4 paddle disc. In comparison the 4 paddle disc provides a reduced pedal effort, whereas the lighter 3 paddle disc allows for a quicker shifting response.
Specifications
Outer Diameter (mm)
220
Disc
Facing
Cerametallic
Push/Pull Type
PUSH
Sprung Centre Disc?
Yes
Torque @ Flywheel
240 lb.ft./320 Nm
Torque @ Wheels
200 lb.ft./260 Nm
Clamp Load (N)
6940
No. of Paddles
3
Additional Information
With bearing(s)
EXEDY cerametallic clutches are designed to handle the abuse of high power modified engines. Our cerametallic friction material can handle much more abuse than stock type disc assemblies without slipping and fading.
All EXEDY Stage 2 cerametallic clutch discs have sprung center dampers to reduce the impact and shock loads transmitted through the drivetrain. We offer two types of cerametallic discs, “thick” and “thin” along with a cushion button disc.
Thick Disc
The “thick” discs have better heat capacity and therefore better durability in demanding applications. Even with the “thick” disc, our three and four puck designs typically have less inertia than a stock disc and work well for street, rally and track use.
Thin Disc
The “thin” discs offer greatly reduced inertia to improve shift effort, allow for quicker shifting, and improve synchro
durability. These discs are approximately 1/2 the thickness of a stock disc and are recommended for circuit track use only.
Cushion Button Disc
The remarkable Cushion Button Disc combines cerametallic button facing with marcel cushion springs to maintain comfortable driving while supporting a respectable amount of power. It’s smooth engagement is ideal for the street, and thanks to its heavy duty sprung hub dampening assembly, can handle the power of high torque
motors. The Cushion Button Disc is currently available for limited applications, however more fitments will be released in the near future.
Clutch Cover
These clutch covers are designed to achieve a clamping load that is approx. 40% higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates and, high burst strength can be achieved in all temperature ranges.
All EXEDY Racing Stage Ceremetallic Clutch Kits carry SFI 1.1 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.
PLEASE NOTE: All referenced torque ratings are measured at the wheels.
Specs
Clamp Load | 1651 |
Disc Diameter (Inches) | 9.05 |
Disc Diameter (Millimeters) | 230 |
Spline Count | 24 |
Spline Size (Inches) | 1 |
Spline Size (Millimeters) | 26 |
Torque Capacity (ft/lbs.) | 255 |
Applications
Models suitable for this product
Honda | Civic | 2017 - 2018 | EX Hatchback - 1.5L Turbo |
Honda | Civic | 2017 - 2018 | EX-L Coupe - 1.5L Turbo |
Honda | Civic | 2017 | EX-L Hatchback - 1.5L Turbo |
Honda | Civic | 2017 - 2018 | EX-L Sedan - 1.5L Turbo |
Honda | Civic | 2017 - 2018 | EX-T Coupe - 1.5L Turbo |
Honda | Civic | 2017 - 2018 | EX-T Sedan - 1.5L Turbo |
Honda | Civic | 2017 - 2018 | Sport - 1.5L Turbo |
Honda | Civic | 2017 - 2018 | Sport Touring - 1.5L Turbo |
Honda | Civic | 2017 - 2020 | LX Hatchback - 1.5L Turbo |
Honda | Civic | 2017 - 2020 | Si Coupe - 1.5L Turbo |
Honda | Civic | 2017 - 2020 | Si Sedan - 1.5L Turbo |
Honda | Civic | 2017 - 2020 | Touring Coupe - 1.5L Turbo |
Honda | Civic | 2017 - 2020 | Touring Sedan - 1.5L Turbo |
Honda | Civic | 2019 - 2020 | Sport Hatchback - 1.5L Turbo |
Honda | Civic | 2019 - 2020 | Sport Touring Hatchback - 1.5L Turbo |