The Whirlpool refrigerator is a powerhouse and one of the leading appliances in this category.
However, the filter has to work properly for it to function as intended. If things are not working as intended, this can lead to a situation where the filter light goes out.
This is why it’s important to learn how to reset the filter light on a Whirlpool refrigerator.
To reset the filter light on a Whirlpool refrigerator, start by pressing and holding the “Filter Reset” button for three seconds. The warning light should now be gone. If not, unplug the fridge and wait 10 minutes before trying again.
Please note, you may hear a beep when the three seconds are up. This means the reset process has been initiated and it should be good to go.
Your goal is to keep holding the button until this happens.
For the most part, this is a simple process and Whirlpool’s engineering excellence ensures the filter light will function as you want it to.
This guide will go into more detail on how to reset the filter light on a Whirlpool refrigerator.
- Best Water Filter (EDITOR’S CHOICE)
- Steps On How To Reset Filter Light On Whirlpool Refrigerator
- 1. Press And Hold The “Filter Reset” Button
- 2. Wait For The Beep After 3 Seconds
- 3. Unplug the Fridge (If Necessary)
- 4. Keep An Eye Out On The Warning Light
- Final Thoughts
Best Water Filter(EDITOR’S CHOICE)
Sale
everydrop by Whirlpool Ice and Water Refrigerator Filter 1,...
- Make sure this fits by entering your refrigerator model number
- Everydrop Filter 1 is the only filter approved by: Whirlpool, Maytag, Amana, KitchenAid and JennAir brands
- Certified to reduce 99% of lead, offering superior contaminant reduction for you and your family
Last update on 2022-10-12 / Affiliate links / Images from Amazon Product Advertising API
1. Press And Hold The “Filter Reset” Button
The red H20 light on a Whirlpool refrigerator is a sign the filter has to be replaced.
This is common and it is a good indicator that you should go through a full sweep of the appliance to see what needs to be changed.
For the most part, it’s just going to be the water filter.
Once you have completed the change, it’s time to reset the Whirlpool fridge filter light. To do this, you are going to start by walking up to the panel and finding the “Filter Reset” button.
This should be to the right of the panel, but it can vary depending on the model.
2. Wait For The Beep After 3 Seconds
Once you have found the button, it’s time to press “Filter Reset” for 3 seconds.
The countdown begins as soon as you press down and hold that position. Remember, if you let the button go, it will stop the countdown in its tracks.
Wait the entire three seconds and then you are going to hear a beeping noise.
This beep is to indicate the reset has started.
This will cause the light to go through a few steps and then it will get rid of the red light that you were seeing before meaning everything is back to how it should be.
3. Unplug the Fridge (If Necessary)
When it comes to different Whirlpool refrigerator warning lights, this is one of the more common ones.
However, it might not be as simple as pressing the “Filter Reset” button in some cases.
This is when you are going to have to go for a different approach. This includes unplugging the fridge for 10-15 minutes.
This is going to help reset the panel.
You will want to make sure to wait or it won’t work.
Once you have waited 10-15 minutes, plug the Whirlpool refrigerator back in. This is going to restart the fridge and you will notice the light is gone.
4. Keep An Eye Out On The Warning Light
If the water filter light won’t reset, you need to keep tabs on it.
This is a common issue that can get worse if it doesn’t go away. The reason is you won’t know when the water filter goes bad next time and it might cause the water to get ruined.
Since you are going to be using the water, it’s best to continue working on the resetting process until it’s fixed.
By going through the whirlpool refrigerator h20 red light reset, you are going to make sure the refrigerator’s sensor is back to how it should be. Until then, you will remain unaware of how the water filter is doing in the fridge.
Final Thoughts
These are the main steps on how to reset the filter light on a Whirlpool refrigerator.
To reset the filter light on a Whirlpool refrigerator, press and hold the “Filter Reset” button for three seconds. Once you hear the beep, let it go. This will get rid of the warning light on the display. If this doesn’t work, unplug the fridge and let it sit for 10-15 minutes before plugging it in again. This should fix the problem.
Go through each step carefully.
You will want to make sure the water filter light does get reset. Whirlpool attempts to make it as easy as possible, so take advantage of the button and ensure it’s held for three seconds before letting go.
Read More On Kitchens:
- Steps For Correcting Samsung Fridge After The Power Is Gone
- How To Fix Temperature Issues With LG Fridge
- Does Electric Fridge Leak CO2?
- Does A Fridge Create Heat?
- What Is The Chemical Odor Coming From My Fridge?
- Steps For Repairing Compressor In A Fridge That’s Not Running