Reset oil service light Jeep Compass. From years: 2008, 2009, 2010, 2011, 2012. How do you reset oil service light Jeep Compass. Reset CHANgE OIL Message Jeep Compass. Your vehicle is equipped with an engine oil change indicator
system. The “CHANgE OIL” message will flash in the instrument cluster odometer for approximately 12 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty-cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off
the message temporarily, press and release the Trip Odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure:
NOTE: If the indicator message illuminates when you start the engine, the oil change indicator system did not reset. If necessary, repeat this procedure. All information is taken from the Jeep Compass owners manual. .That it is the full procedure how to reset oil service light Jeep Compass. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Jeep cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself. This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts. Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Jeep vehicles.
Jeep Compass - Video tutorial Model: Jeep Compass 552, MK 2 - Years 2016-2022 Get in your car and, by pressing the ignition button, turn on the instrument panel but not the engine. Once the various warning lights have gone out but the oil change warning light remains on, press the acceleration pedal three times. Turn off the ignition and wait a few seconds. While you are going to turn it back on, press the brake pedal and keep it pressed. Remember that this reset procedure must not be carried out unless the engine oil has been actually changed first, but must only be carried out after this maintenance, in order to avoid serious damage to the engine itself. Posted on 19 October 2021
Frequently Asked QuestionsHow often does a 2022 Jeep Compass need an oil change?Once the oil change indicator lights up, the manufacturer recommends changing your 2022 Compass' oil within 500 miles. Change your vehicle's oil at 10,000-mile intervals or every 12-months, whichever comes first.
How do you reset the oil life in a jeep after changing the oil?Your vehicle is equipped with an engine oil change indicator system.. Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (do not start the engine).. Fully depress the accelerator pedal, slowly, three times within 10 seconds.. |